Giesen WxA

This page walks you through to integrate Giesen WxA (W1A, W6A, W6 PRO, W15A, W30A, W60A, W140A) with Firescope.

If you need support with integrating your machine, please click below and let us know.

-> https://firescope.channel.io/home

1. (Very Important) Check Roaster Compatibility

The supported models include WxA (W1A, W6A, W15A, etc) . Your roaster must have a LAN port or the control tower as shown in the image below.

2. Preparation and Network Configuration

Materials needed

A 'cross LAN cable' is required for connecting to a Giesen roaster. Standard direct LAN cable will not work.

Network Configuration

Configure the network for the relevant operating system.

Windows

For different versions of Windows, follow the steps below to adjust your network settings:

• Window 7, 8: Start -> Control Panel -> Network and Sharing Center → Change adapter settings (left sidebar)

• Window 10: Start -> Settings icon -> Network & Internet -> Change adapter options (left sidebar)

• Window 11: Control Panel -> View network status and tasks under Network and Internet -> Change adapter settings (left sidebar)

1. Right-click the icon labeled "Local Area Connection" or "Ethernet" (may be displayed as 'Not connected' depending on the device), then select Properties from the menu.

1. In the Local Area Connection Properties window, select Internet Protocol Version 4 (TCP/IPv4) and click the Properties button.

1. A new window will appear where you can input the IP addresses for the roaster. Enter the required IP addresses as specified by your roaster's network setup.

Mac (latest version)

1. Click the Apple icon in the top-left corner and open the System Preferences. Go to the 'Network' tab on the left.

2. In the Network tab, click the 'Service Order' button in the bottom-right corner.

3. Drag Wi-Fi to the top of the list and click 'OK'.

4. Select the 'USB 10/100 LAN' item and click 'Advanced'.

5. Click the 'TCP/IP' tab on the left and change the IPv4 configuration to 'Manual'.

6. Fill in the IP address, subnet mask, and router (default gateway) according to the model you are connecting to from the table below, and click 'OK'.

Mac (previous version)

1. Click the Apple icon in the top-left corner and open the System Preferences. Go to the 'Network' tab on the left.

2. In the Network tab, click the 'Service Order' button in the bottom-right corner.

3. Drag Wi-Fi to the top of the list and click 'OK'.

4. Select the LAN option on the left, and then choose "Manually" for IPv4 configuration.

5. Fill in the IP address, subnet mask, and routher (default gateway) according to the table for your model, and click 'Apply'.

Machine produced after 2018

Name	IP Address	Subnet Mask	Firescope IP
W1	172.30.30.42	255.255.255.0	172.30.30.30
W6	172.30.30.42	255.255.255.0	172.30.30.50
W15	172.30.30.42	255.255.255.0	172.30.30.50
W30	172.30.30.42	255.255.255.0	172.30.30.70
W60	172.30.30.42	255.255.255.0	172.30.30.90
W140	172.30.30.42	255.255.255.0	172.30.30.110

Machine produced before 2018

Name	IP Address	Subnet Mask	Firescope IP
W1	192.168.2.1	255.255.255.0	192.168.2.180
W6	192.168.2.1	255.255.255.0	192.168.2.180
W15	192.168.2.1	255.255.255.0	192.168.2.180
W30	192.168.3.1	255.255.255.0	192.168.3.180
W60	192.168.3.1	255.255.255.0	192.168.3.180
W140	192.168.3.1	255.255.255.0	192.168.3.180

3. Configuring Firescope

1. In Firescope, go to the 'Machine' menu and click the 'Create' button.

2. Enter a nickname to easily identify your roasting machine.

3. Select the appropriate preset from the 'Preset' select box based on the instructions below.

Choosing the correct Giesen roaster preset:

If you have entered a Cropster code into the Giesen roaster for decimal integration, select Giesen WxA+preset.

If no Cropster code is used, select Giesen WxApreset for integration.

4. In the IP configuration table above, find your model and enter the matching Firescope IP. The port should remain at 102 unless you have specific instructions to change it.

4. If the setup is completed, you should start receiving temperature and sensor data within 10 seconds.

If the connection isn't working correctly, try the follow troubleshooting:

• Double-check the IP address to ensure it was entered correctly.

• Verify that the LAN cable connected to the PC is properly recognized; unplug and replug it if necessary.

• For Giesen WxA (decimal) preset, try switching to the 'Giesen WxA' preset instead. Also, if any settings were manually adjusted, ensure they are correct.

If you have difficulty connecting to the roasting machine, please send an email to [e-mail]